Tips to Fix HP Printer Typical Error Codes

When it comes to rugged printing performance nothing can beat the HP Printers. HP lineup of printers offers great printing speed with extended service life. However, on intense uses, HP Printer are often exposed to technical issues. To resolve these errors in a minimum possible time frame, simply dial our toll-free number and connect with HP Printer Tech Support  1-855-536-5666 executive.

Error Code 50

Error Code 50 appears when printer detects the issues with Fuser assembly. This error code might be popped up in the following scenario

➔        Fusing temperature is detected on the low side.

➔        Fuser assembly preheating protection

➔        Fusing temperature is detected on the high side.

➔        Invariable Power supply voltage

➔        Mismatching of Fuser assemblies.

To overcome this error, follow the below-mentioned procedure

●       Switch off the printer and waits for 15 min.

●       Reboot the printer again.

●       Now make sure to reinstall fuser assembly.

●       Turn off the printer and  Remove fuser assembly and check

●       whether the communication is intact. In case, if you find it inert make sure to connect with HP Printer Customer Support.

Error Code 51

This error code comes into existence when printer detects the issue with laser beam scanning. It is a common error which can be resolved by simply rebooting the printer or Reinstall the laser and its cable.

Error Code 52

This error code occurs when printer detects the issue with laser beam speed. It is a common error which can be resolved by simply rebooting the printer or Reinstall the laser and its cable.

Error Code 56

Error Code 56 occurs when printers detect a temporary issue with certain hardware. To cater this you need to check the printer configuration or reboot the printer.

Error Code 57

Error Code 57 occurs when a fan of the printer gets disrupt by stuck by obstruction by foreign elements. To overcome this error effectively, refer the issue with the printer manual and get the related troubleshoots. In case if these don’t solve the error then make sure to contact with HP Technical Customer Support Number  1-855-536-5666  and fix the errors immediately.