Error Code 50
Error Code 50
shows up when printer distinguishes the issues with Fuser unit. This Error code
may be flown up in the accompanying situation
➔
Fusing temperature is identified on the low side.
➔
Fuser assembly preheating protection
➔
Fusing temperature is identified on the high side.
➔
Invariable Power supply voltage
➔
Mismatching of Fuser congregations.
To conquer this
Error, take after the underneath specified technique
● Switch off the printer and sits tight for
15 min.
● Reboot the printer once more.
● Now make a point to reinstall fuser get
together.
● Turn off the printer and Remove fuser
assemblies and check whether the correspondence is unblemished. If you find it
dormant make a point to interface with HP Printer Customer Support.
Error Code 51
This Error code
appears when printer identifies the issue with laser beam scanning. It is a
typical Error which can be settled by basically rebooting the printer or
Reinstall the laser and its cable.
Error Code 52
This Error code
happens when printer identifies the issue with laser beam speed. It is a
typical Error which can be settled by essentially rebooting the printer or
Reinstall the laser and its cable.
Error Code 56
Error Code 56
happens when printers identify an impermanent issue with certain equipment. To
deal with this you have to check the printer configuration or reboot the
printer.
Error Code 57
Error Code 57
happens when a fan of the printer stalls out by hindrance by remote components.
To conquer this Error adequately, allude the issue with the printer manual and
get the related investigates. In the event that if these don't unravel the
error at that point reach HP Technical Customer Support Number 1-855-536-5666 and fix the Errors instantly.

No comments:
Post a Comment