Steps To Configure SSH On A Cisco Router

Are you unable to configure SSH on a Cisco Router? If so then you land on the correct page. As in this article, we will guide you how to do the same. Cisco Router is a great device and offers exceptional performance at an affordable cost. Apart from this issue, users often encounter severe hardware issues related to their router. To combat these issues in an effective way, make sure to dial our toll-free number and confront with our experts.

Ok! Let’s back to business. In order to configure SSH on a Cisco Router Support Number1-888-501-1186  correctly, make sure to follow the underneath method very precisely.

The whole configuration comprises five steps

●       Hostname

●       IP Domain Name

●       Create SSH Key

●       Create a user

●       Enable SSH

To get started, open up the router command window then follow the below steps

•    Type enable and press enter

•    Type conf t.and press enter

•    Under the switch config, type hostname and hit Enter key.

•    Now you need to put up the IP Domain name. To do so, type IP domain-name. Press enter.

•    Now type crypto key generates a and press Enter.

•    Type y and hit enter.

•    Now the command window will ask about amount bit require to generate SSH key.

•    So for the better protection, type 1024 b and hit enter.

•    In order to enable the SSH, type line vty 0 15 (Note: Here 15 represent the number of channels located on your router).

•    Type transport input ssh and hit enter.

•    Enter your username and password.

•    Type line vty 0 15 again and press enter.

•    Type login and hit enter

•    In the next line, type exit to wrap up the configuration.

•    Now go back to the putty configuration window and type the IP address.

•    Click OK to open the putty command window.

•    Enter your username and password and hit Enter. For more detail and insight on the issue, feel to contact our executive on Cisco Router Customer Support. Number1-888-501-1186